SUA Warning & Display Settings

This page is accessed from the “Settings” menu.

You can select one of the main buttons to go to

The Check for SUA Warnings option controls if checks will be made for SUA warnings or not. This is a master switch to any options on the Warning Configuration page.

The Display only Warned SUA and Highlight Warned SUA options allow you to control how SUA items with warnings appear on the screen. This can help declutter the map, and make the warned SUA item much clearer.

The Auto Dismiss field is used to set a time to automatically dismiss SUA and other warning screens without interaction from the Pilot.

If the option Auto Start after 1st Wpt is checked the task will automatically re-start if you happen to enter the start zone after you have already reached the first waypoint in the task. The Re-Start dialog will still appear, but will not dismiss until the Pilot confirms to re-start or not.

Normally, once you have achieved the 1st waypoint in the task, it will not automatically re-start the task, if you enter the start zone again.

The Final Glide Achieved Alert option will let the pilot know during thermalling that the required final glide height (including safety height) has been reached.

soarpilot/introduction.txt · Last modified: 2009/05/04 06:59 by pgleesonuk
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki